Turn signals not working

Reply Subscribe

Thread Tools

Search this Thread

Jun 21, 2007 | 07:16 AM

dave2

Thread Starter

Senior User

Joined: Oct 2005

Posts: 446

Likes: 1

From: Germany

Turn signals not working

Hi Folks,
I know it's probably been covered many times, but please humor my laziness and slow connection.
From one day to the next, my turn signals stopped working. The flasher fell apart one day while I was driving and I stuck it back together. Figured it had finally went **** up and got another one. Nothing at all. The fuse is OK also. Is there another fuse and/or CB somewhere that I may have missed? (1990 F250 4x4)

Thanks, Dave

Jun 25, 2007 | 06:50 AM

dave2

Thread Starter

Senior User

Joined: Oct 2005

Posts: 446

Likes: 1

From: Germany

Just thought I'd try again. I have power at the fuse, the fuse is good, and I have power to the flasher (also good). Is there something between the flasher and the bulbs that I need to be looking for?Next step is to take each bulb out and try the socket, just haven't had time. Any ideas what it could be?

Thanks, Dave

Jun 25, 2007 | 09:15 AM

ACarbone624

Senior User

Joined: Mar 2007

Posts: 279

Likes: 0

From: Vineland, New Jersey

Check to see if your getting current to the bulb sockets.....You also might want to check the bulbs themselves....one could be bad

Jun 25, 2007 | 09:51 AM

Bruce R Leech

Elder User

Joined: Feb 2007

Posts: 707

Likes: 1

From: Mulege south Baja ca. Mx.

are you getting power back out of the flasher? it could be a bad new one or the wrong one.

Jun 26, 2007 | 02:17 AM

dave2

Thread Starter

Senior User

Joined: Oct 2005

Posts: 446

Likes: 1

From: Germany

It just dawned on me, I only have one flasher in the fuse block. Does this cover both signals and 4 ways? Or is there a seperate one? Hopefully I'll have time to dig into it this weekend. The little arrows on the dash don't even light up.

Thanks, Dave