??? For the experts
Thread Starter
|
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
??? For the experts
I was wondering, I am planning on building in the future my 300 and was wondering something. Obviously the computer will have to be modified so that brought me to my question. If I were to give superchip a call would they be able to provide a chip that could rework the computer to support say new fuel pumps, 30lbs injectors, cam, etc.? Or would that be unrealistic? Trying to figure out a way to reprogram the air/fuel/rpm map so I do not have to locate a dyno tuner (which would be the best just more expensive) and in my case a lot of trouble. Any thoughts appreciated, thanks
Senior User
Joined: Apr 2000
Posts: 453
Likes: 0
??? For the experts
JW: That is not an unusual request for Superchips. That can be easily accomplished. I have a "Custom Programming" sheet to be filled out with very detailed info on your mods. I can e-mail the form to you. You fill out COMPLETELY, and mail back to me. You then pay Ken for the chip and an additional $125.00 for the custom program. This is a one-time fee, you may add other mods at any time and not pay this fee again. Superchips normally has the program done is about 10 working days.
Thanks
Danny
2001 Cobra-Lazer Red
3:73 Gears
Steeda Tri-Ax Short Shifter
Bassanni X-Pipe
DiabloSport Chipped
DenseCharger
Thanks
Danny
2001 Cobra-Lazer Red
3:73 Gears
Steeda Tri-Ax Short Shifter
Bassanni X-Pipe
DiabloSport Chipped
DenseCharger
Thread Starter
|
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
??? For the experts
That would be good news. Out of curiosity what is the most radical request of a 4.9 asked of Superchips and what was there response of the customer? Trying to get an idea of how well this works. Thanks you for your time
