New member with a question
Thread Starter
|
New User
Joined: Jun 2007
Posts: 1
Likes: 0
New member with a question
I own a 2001 f250 with auto locks. The question is other than reliability why would you change out the hubs? If I understand correctly you can't use shift on the fly if you use a manual hub. Is that correct?
Post Fiend
Joined: Feb 2000
Posts: 11,496
Likes: 6
From: Kansas
Welcome! 
One reason is strength. But you can find out more from the experts in the Off Road and 4x4 forum. Just click on the Forums tab at the upper left and scroll down to it. You also can find out about local information from the state chapters so drop into them and see what is happening around you.
One reason is strength. But you can find out more from the experts in the Off Road and 4x4 forum. Just click on the Forums tab at the upper left and scroll down to it. You also can find out about local information from the state chapters so drop into them and see what is happening around you.
Thread
Thread Starter
Forum
Replies
Last Post