460 engine build help
Thread Starter
|
New User
Joined: Nov 2006
Posts: 1
Likes: 0
460 engine build help
Hey guys its been a while. I just got my 460 engine to build and need some info.
Ok this is what I got.
D1VE block with D3VE heads.
I need a 500Hp motor with a good bit of torque.
Can I do this with what I have with the stock crank and rods. I will buy whatever I need or even stroke it, bore it, new pistons ect:
Can someone give me a good engine combo thats proven.
Plus I'd like it to have a bad azz idle.It is going in a 78f150 4x4 with 17/40's tires.50/50 on road and offroad.Kinda want to do it on a budget do not want to buy aftermarket heads. Just realy need a good list for parts.
Thanks for any help
Ok this is what I got.
D1VE block with D3VE heads.
I need a 500Hp motor with a good bit of torque.
Can I do this with what I have with the stock crank and rods. I will buy whatever I need or even stroke it, bore it, new pistons ect:
Can someone give me a good engine combo thats proven.
Plus I'd like it to have a bad azz idle.It is going in a 78f150 4x4 with 17/40's tires.50/50 on road and offroad.Kinda want to do it on a budget do not want to buy aftermarket heads. Just realy need a good list for parts.
Thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
arkredneck
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
12
Dec 5, 2015 06:40 AM
C-Leigh Racing
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
10
Mar 10, 2009 10:40 PM
