What does my plate decode to?
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 213
Likes: 1
From: Port Coquitlam, BC Canada
What does my plate decode to?
I tried a decoder, but it said it was built in Kansas and that the diff was 3.55
and it was not sure on the tranny.
Plus, I read somewhere that if the dipstick is on the front that I have a car engine and not a truck.
Any ideas about that?
and it was not sure on the tranny.
Plus, I read somewhere that if the dipstick is on the front that I have a car engine and not a truck.
Any ideas about that?
Posting Legend
Joined: Sep 2001
Posts: 30,255
Likes: 37
That poor truck has been modified a bit...
Results for VIN#: X25SKY66859
Model Year: 77
Series: F250 - 4x2 Super Cab Pickup
Engine: 8 Cyl, 400ci, (6.6L) 2bbl
Assembly Plant: Kansas City
Transmission: The only information provided is Automatic. My guess is C6
Front Axle: P.S.
Rear Axle: 3.54 5300lb Dana 60
The Kansas City plant is near Claycomo MO.
Results for VIN#: X25SKY66859
Model Year: 77
Series: F250 - 4x2 Super Cab Pickup
Engine: 8 Cyl, 400ci, (6.6L) 2bbl
Assembly Plant: Kansas City
Transmission: The only information provided is Automatic. My guess is C6
Front Axle: P.S.
Rear Axle: 3.54 5300lb Dana 60
The Kansas City plant is near Claycomo MO.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Rating Plate
X25SKY6659
X25 - F250 SC
S- 400
K- Kansas City
Y66859 -
155 = 155" Wheelbase
Z = Exterior colour - Medium copper or Copper Poly
X255 - Pickup GVWR code -
DUM
D - Vinyl Custom Bench
U - Tan Interior
M - Super cab Styleside Box
G - Automatic - C6
Axle -37 J
37 Dana 60 3.54 5300 lbs
J - Power steering
DSO -B7 - Pacific region Canada - Vancouver or Victoria
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Calibration code with revision level & Engine Identification sticker
Vacuum Routing Diagram
7-74-R0
X25SKY6659
X25 - F250 SC
S- 400
K- Kansas City
Y66859 -
155 = 155" Wheelbase
Z = Exterior colour - Medium copper or Copper Poly
X255 - Pickup GVWR code -
DUM
D - Vinyl Custom Bench
U - Tan Interior
M - Super cab Styleside Box
G - Automatic - C6
Axle -37 J
37 Dana 60 3.54 5300 lbs
J - Power steering
DSO -B7 - Pacific region Canada - Vancouver or Victoria
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Calibration code with revision level & Engine Identification sticker
Vacuum Routing Diagram
7-74-R0
Last edited by Mil1ion; Jun 12, 2007 at 10:36 PM.
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 213
Likes: 1
From: Port Coquitlam, BC Canada
Well thanks, you know I had it in my head that I had a 3.73 rear end, and have thought that for a while now.
So I did not think the info was correct.
So now I know better.
Now then, is this a good ratio for towing?
I used to have a 10' camper I hauled, but now have an old 1989 18.5 Fifth wheel I will tow now, is this a good rear end for towing?
Thanks again, for helping me out here.
So I did not think the info was correct.
So now I know better.
Now then, is this a good ratio for towing?
I used to have a 10' camper I hauled, but now have an old 1989 18.5 Fifth wheel I will tow now, is this a good rear end for towing?
Thanks again, for helping me out here.
