Diablo Chip
Thread Starter
|
New User
Joined: Apr 2002
Posts: 1
Likes: 0
Diablo Chip
well I just got back into town and my chip was waiting for me(from motorhaven.com) ... all was well until I attempted to insert the chip in the ECU .... it still sticks out 1/4" - 3/8" ... I don't see any obstructions .... it's too late to call them now ... has anyone else had this problem ... I have a 2001 Explorer Sport Trac (Job 2)(JXV3 computer code).:-( :-(
Elder User
Joined: Dec 2000
Posts: 654
Likes: 0
From: Michigan
Diablo Chip
Mike;
I don't know if your explorer is the same as my supperduty, but my chip sticks out of the end of my ECU about 1/4 in. You have to use a piece of elect. tape to keep it in place. It works great. I hope you enjoy yours as much as I do mine.
Jim
I don't know if your explorer is the same as my supperduty, but my chip sticks out of the end of my ECU about 1/4 in. You have to use a piece of elect. tape to keep it in place. It works great. I hope you enjoy yours as much as I do mine.
Jim
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
Diablo Chip
It should not hit anything, unlike the Superchips which sticks out over an inch. Unfortunately, the Diablo design is as close as you can come to a completely enclosed module (the Diablo module is in the computer box, the connector sticks out about 1/8th.
