c6 rebuild
Thread Starter
|
Junior User
Joined: Aug 2006
Posts: 98
Likes: 0
From: Rushville, New York
c6 rebuild
Hello to all in this forum. I am getting ready to start tearing down my 77 for a rebuild/restoreation. I am set for the engine 400 that will be in the mid to upper 300 hp and roughly 425 to 450 ft lb of torque. The truck is running 3.50 gears and it is a 4x4 w a C6 auto. What would be suggested to be done to the tranny to make sure it will stand up to the engine. I only tow a boat 1500 to 1800 lb. And I don't go muddin or 4wheelin except for winter and farm fields. Where do you get parts.
Thanks AL
Thanks AL
