BJ Spacers
Thread Starter
|
Senior User
Joined: Nov 2005
Posts: 120
Likes: 0
From: Carlsbad
BJ Spacers
Hi guys. Just wanted to give you a heads up. For all you A-Arm guys out there, I'm working on some billet ball joint spacers for 2wd Rangers and Exploders. They'll give an extra 1.5" of lift, and an additional 1.5" of wheel travel. 'Bout $120 out the door. I'll let ya know, they're still in the design stages, i.e., still working on how big of a spacer can be used and still align properly.
Lemme know if you'd be interested!
Lemme know if you'd be interested!
Post Fiend
Joined: Jul 2005
Posts: 8,462
Likes: 4
From: Durant, OK (SOSU)
Not to be a party pooper, but you can already get them on the internet, ebay, etc for less than that. You can get a 2" front and rear lift kit that uses spacers and blocks with all hardware for $130 shipped if you look around. Billet is superior to many of the polyurethane ones out there in my opinion, but you're way behind the curve on making one of these.
