76 hood fit 67
#1
#2
76 hood fit 67
Grab anything and everything off of that rig. All parts will interchange. If the rear and front axles are there grab them too.
The rear end will be the Big Bearing housing and the front is the disc braked Dana-44. the only drawback to the front end is the inverted 'Y' stearing vs the inverted 'T' of the 66-75 years. there are plenty of conversions out there to change this to the 'T' linkage.
Eric
Proud owner of a '73 F-250 4x4 High Boy, 460 V8, NP435, NP205, Dana 60 rear w/Detroit Locker
And a '68 Bronco 289 v8 , NP435 , Dana 20
The rear end will be the Big Bearing housing and the front is the disc braked Dana-44. the only drawback to the front end is the inverted 'Y' stearing vs the inverted 'T' of the 66-75 years. there are plenty of conversions out there to change this to the 'T' linkage.
Eric
Proud owner of a '73 F-250 4x4 High Boy, 460 V8, NP435, NP205, Dana 60 rear w/Detroit Locker
And a '68 Bronco 289 v8 , NP435 , Dana 20