Identify this sensor
Thread Starter
|
New User
Joined: Jun 2005
Posts: 5
Likes: 0
Help Identify this sensor
I have a 96 PSD....I have fuel leaking from a sensor located on the right side of the filter housing. It looks similar to an old oil pressure sensor. I have searched the forums but cant fiigure out what the name of this sensor is so I can pick up a new one. Any Ideas?
Last edited by roady891; May 28, 2007 at 10:06 AM.
Thread Starter
|
New User
Joined: Jun 2005
Posts: 5
Likes: 0
After doing some more searching here I came to realize the sensor in question is screwed into the "Fuel pressure regulator" housing....its located about an inch or so behind the schrader valve. I thought I had a major oil leak until I tracked it down to the leaking sensor.
Senior User
Joined: Mar 2007
Posts: 262
Likes: 0
From: Idaho
Lead Driver
Joined: Aug 2006
Posts: 5,259
Likes: 17
From: Gambrills
WOW thats a great pic! how many miles does it have on it? and is that a lamenet wood floor or neloliuom? that is great man...I just changed my fuel/lift/transfer pump I wish I would have cleaned it up the same way! Looks great!..WD! I probally sound like Gludiomaximus head....butt I am not tryen to be one
Last edited by Copedawg; May 28, 2007 at 09:31 PM.
