Aluminum Heads
Thread Starter
|
Senior User
Joined: Jul 2006
Posts: 391
Likes: 0
From: Peterborough, Ontario
Aluminum Heads
I have resolved my valve clearance issue, I have clayed the pistons and valves and have clearance without the head gasket so should have .050" clearance with gasket.I have decided to powder coat the heads, I have posted a couple of pictures and would like everyones comments on the color choice, too late it is done. Also I was wondering about spark plug choices, is there a center fire plug available for the flatheads as I need extra clearance for the electrode.
Getting there
wgc
Getting there
wgc
