Quick Video
Thread Starter
|
Laughing Gas
Joined: Jan 2003
Posts: 1,019
Likes: 2
From: Georgetown, Ky
Quick Video
I took this the first of the week, Its just a quick walkaround of my truck. Thought ya'll might like to hear the new Cam. Comp Cams 280 installed Straight up. Beehive Valve Springs.
What ya think??
http://www.youtube.com/watch?v=K71IOHe5JBM
What ya think??
http://www.youtube.com/watch?v=K71IOHe5JBM
Cargo Master
Joined: Apr 2004
Posts: 2,574
Likes: 4
From: Golden, CO
Sweeeeet! TIGGER is sounding good!!!
You'll have to put some of the video links in your Sig. for the people who missed them before.
You'll have to put some of the video links in your Sig. for the people who missed them before.
Last edited by Hypoid; May 12, 2007 at 09:20 PM.
Trending Topics
Thread Starter
|
Laughing Gas
Joined: Jan 2003
Posts: 1,019
Likes: 2
From: Georgetown, Ky
Your Right I'll have to do that. I hope to get some more footage now that I own a video Camera..
Slinger I built the motor back in HighSchool. Its been in two different trucks and is 9 years old.. No Complaints.
I put the new Cam in and Swapped the Valve Springs when I had the motor out for paint, as well as a new dbl roller timing set, new gaskets on everything. The motor is bored .030 over - Forged Pistons, Moly Rings, ported heads, edelbrock Intake, Holley Carb, balanced, Blueprinted..all the fun usual stuff. Need a bit of tweaking on the carb, but Im deciding wether to replace it with a BG Carb..
Hypoid - Thanks! Sound better when I get rid of those Cherry Bombs.. Flowmaster 40series with exhaust cut outs goin on the middle/end of next week.
Slinger I built the motor back in HighSchool. Its been in two different trucks and is 9 years old.. No Complaints.
I put the new Cam in and Swapped the Valve Springs when I had the motor out for paint, as well as a new dbl roller timing set, new gaskets on everything. The motor is bored .030 over - Forged Pistons, Moly Rings, ported heads, edelbrock Intake, Holley Carb, balanced, Blueprinted..all the fun usual stuff. Need a bit of tweaking on the carb, but Im deciding wether to replace it with a BG Carb..
Hypoid - Thanks! Sound better when I get rid of those Cherry Bombs.. Flowmaster 40series with exhaust cut outs goin on the middle/end of next week.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Senior User
Joined: Dec 2005
Posts: 350
Likes: 0
Cool, I put a 390 in my 79' this past summer. It has some gasket issues and needs new rings. I would like to do a nice rebuild like you did, in a couple of years. nothing too over the top.
The Barry Grant Carbs are a very good carb, from what i here. I know www.pawengineparts.com Seel demon carbs and come with a tuning video. For a pretty decent price.
The Barry Grant Carbs are a very good carb, from what i here. I know www.pawengineparts.com Seel demon carbs and come with a tuning video. For a pretty decent price.
Lead Driver
Joined: Jan 2003
Posts: 9,893
Likes: 12
From: Ohio
Ahhhhhhhh, the sweet rumble of CHERRY BOMBS!! LOL!!
Been a long time since I saw anything set up like that. Back in the eighties every "hot rod" was just like that: headers and cherry bombs(no tailpipes). Radio? What radio...can't hear it! Every truck I had back then had that exhaust........it took quite a few years before I would "splurge" for a full exhaust.
Don't take too much crap for a "redish" Ford motor since back in the early 60's the small block FORDS were red!
I like the "BOSS" type stripe! Cool looking truck, I like it!
Been a long time since I saw anything set up like that. Back in the eighties every "hot rod" was just like that: headers and cherry bombs(no tailpipes). Radio? What radio...can't hear it! Every truck I had back then had that exhaust........it took quite a few years before I would "splurge" for a full exhaust.
Don't take too much crap for a "redish" Ford motor since back in the early 60's the small block FORDS were red!
I like the "BOSS" type stripe! Cool looking truck, I like it!
Last edited by Freightrain; May 14, 2007 at 02:47 PM.
