IDM Relay - power feed?
Thread Starter
|
Freshman User
Joined: Jul 2002
Posts: 47
Likes: 0
From: Alberta, Canada
IDM Relay - power feed?
Ok...I'm sick of forum searching and googling...
I'm trying to install an anti-theft switch on the power feed to the IDM relay. Anyone have the specific wire colors and locations to make this happen?
Oh ya....02 350 PSD. Thanks in advance.
I'm trying to install an anti-theft switch on the power feed to the IDM relay. Anyone have the specific wire colors and locations to make this happen?
Oh ya....02 350 PSD. Thanks in advance.
Post Fiend
Joined: Feb 2006
Posts: 11,892
Likes: 2
From: Middle Tennessee
Post Fiend
Joined: Feb 2006
Posts: 11,892
Likes: 2
From: Middle Tennessee
Best I could do and give the whole diagram. Copy/save the image to your puter and enlarge it.
I'm not so sure I would fool with those wires though as the manual expressly cautions against piercing and splicing wires. There are other anti-theft methods including a DP f5 switch.
I'm not so sure I would fool with those wires though as the manual expressly cautions against piercing and splicing wires. There are other anti-theft methods including a DP f5 switch.
