Lights
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 178
Likes: 0
Lights
I have a big problem i was driving my truck and i lost my cluster lights my parking lights everything but my high and low beams no trailer lights not door lights (LEDS in the door handles) i had turn signals and brake lights thats it can som1 please help me
Cargo Master
Joined: Aug 2002
Posts: 2,117
Likes: 8
From: Over Yonder, MN
Including the ones under the hood? Sorry, you’d be surprised how many people don’t know about those. When you press the lock button on your key fob, when it honks do the parking lights flash?
Cargo Master
Joined: Aug 2002
Posts: 2,117
Likes: 8
From: Over Yonder, MN
Ok, I’m going to go ahead and assume that you have Auto lamps as well. If you don’t have parking lights when you use the switch, auto lamps or the key fob, then there are only two things, the fuse and wiring. Since you’ve checked the fuses, do you have a voltmeter to start checking the wires?
Trending Topics
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 178
Likes: 0
some were i have one and i don t have auto lights and when i push the lock button on the fob the horn honks and the head lights flash but there are no longer parking lights when i do this
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Cargo Master
Joined: Aug 2002
Posts: 2,117
Likes: 8
From: Over Yonder, MN
Ok, well pull the light switch out of the dash and disconnect it. Hold the harness plug so the clip is facing up and measure the voltage between the ground and the 2nd wire in from the left on the bottom row. Should be tan with a white stripe.
