Wheel Question need help
Thread Starter
|
Cross-Country
Joined: Apr 2007
Posts: 85
Likes: 1
From: Fort Myers, Fl.
Wheel Question need help
Hey guys, I have been searching and searching. I am trying to find out if I can fit a 20" rim with 33's on my stock hight 4x4 05 F250 PSD.
Any ideas?
Luke
Any ideas?
Luke
Thread Starter
|
Cross-Country
Joined: Apr 2007
Posts: 85
Likes: 1
From: Fort Myers, Fl.
ah im not sure, I just bought this used. Currently it has 265-70-17 tires with the stock 17" wheels. I am looking to upgrade and am looking for a 20" wheel with the largest tires I coan put on there without a lift. I have no idea the wheel offset I am going to need either.
Senior User
Joined: Oct 2006
Posts: 333
Likes: 0
From: Colorado
I think the general consensus is that up to 35" will fit without much problem(someone will tell us for sure shortly). You can get a leveling kit for the front pretty cheap and get a couple extra inches of clearance that way. Changing to F350 blocks in the back will get you more room there too. Check this gallery from Truck Toyz for possible combinations:
http://www.trucktoyzperformance.com/gallery/?search=ttinstalls
You might want to ask this in the Superduty forum, also.
http://www.trucktoyzperformance.com/gallery/?search=ttinstalls
You might want to ask this in the Superduty forum, also.
Last edited by 62rag; Apr 30, 2007 at 10:14 AM.
