ignition lock cylender
Cargo Master
Joined: Apr 2003
Posts: 2,059
Likes: 426
From: Too close to Houston
Sounds like you need a bigger hammer. Franklin2's appoach works. Find an old Ford (car or truck) at the wrecking yard that has a similar switch. If it's ready for the crusher they probably won't mind you trying different ways to remove the lock cylinder. Do ask first.
Moderator
Joined: Jan 2001
Posts: 57,017
Likes: 2,751
From: Virginia
You can try to attack it from behind the steering wheel. Take the steering wheel off, and start trying to get to the cylinder. Whats holding it in there is a spring loaded pin that lockes into the column casting. That pin can be pushed up from the outside if you had the key. Now you have to figure out a different way to get to it.
Maybe you need to get one of the local neighborhood hoodlums to show you how to work that slide hammer
Maybe you need to get one of the local neighborhood hoodlums to show you how to work that slide hammer
