need info
Thread Starter
|
Senior User
Joined: Dec 2006
Posts: 125
Likes: 0
need info
I am debating which engine to install in my 78 f150 4x4, it is between a 351 cleveland 4v or 2v and the 400 that is currenly in the truck, all 3 engines which ever one I choose will have to be gone through, so I am trying to decide on which one to use, I posted this on the engine forum but didn't get to much info, as for the cleveland I have got a small block bellhousing for my np435 tranny but I would like to run headers on which ever engine I choose and I don't won't to run into a lot of issues like having to notch the frame and such for the headers and the engine mounts not lining up, if it is going to be a big hassle I will just use the 400 and save back the clevelands for another day, if anyone has installed a cleveland in one of these trucks I would like to have some ideas, I also thought of getting a block kit from performance automotive warehouse that will be complete it will just need to be assembled with all the goodies, if anyone has any information on there kits I would like to here it
I know this probably belongs in the engine forum but I am trying to gather as much info as possible to be able to make an informed decision
thanks
I know this probably belongs in the engine forum but I am trying to gather as much info as possible to be able to make an informed decision
thanks
New User
Joined: Jan 2008
Posts: 0
Likes: 24
The same people who visit this forum also visit the engine forums.
FTE didn't used to like people multiposting..it is annoying to people who wish to help and answers become redundant.
That's why there are engine forums
For engine specific questions
FTE didn't used to like people multiposting..it is annoying to people who wish to help and answers become redundant.
That's why there are engine forums
For engine specific questions
