4 wheel drive problems!!!!
Freshman User
Joined: Jul 2001
Posts: 40
Likes: 0
From: Big Sky Country
4 wheel drive problems!!!!
I have an 83 Bronco with a 351W built from a C90E block, ported DOOE heads, an 84 H.O. intake w/a 600 Holley, C6 transmission, w/a 208 Transfer case, 3.55 Locking gears front and rear, My problem is this, when driving in 4-Hi, with the front hubs locked, (manual locking NEW hubs), my Bronco will jerk very sharp as if it is suddenly going into 4 wheel drive along with making a very loud sound as if parked idling at 2000 rpm and dropped into drive! I have told it was a front end problem but have very little knowledge of Ford's 8.8 front ends.
Any suggestions?
Any suggestions?
