Where to Plug Brake Controller?
Thread Starter
|
New User
Joined: Apr 2007
Posts: 10
Likes: 0
Where to Plug Brake Controller?
My '06 F-250 SD did not come with factory contoller. Wish I could afford to add one, but not enough cabbage for that now.
I had a harness for an '05 F-150, but looks like that won't work. I have seen the right one for '06 F-250 for about $15.
Where does the harness hook up to the truck wiring? Doesn't seem to be anywhere around the pedals. Is there more to this than just hook-up and go?
Any help greatly appreciated.
I had a harness for an '05 F-150, but looks like that won't work. I have seen the right one for '06 F-250 for about $15.
Where does the harness hook up to the truck wiring? Doesn't seem to be anywhere around the pedals. Is there more to this than just hook-up and go?
Any help greatly appreciated.
Thread Starter
|
New User
Joined: Apr 2007
Posts: 10
Likes: 0
Apparently the plug for this gen. of SDs is going to be behind the little "coin tray" or storage slip that is just above the driver's side "glove box." I dropped the box down, and just behind the plastic above it, two plugs are attached to the back of the slot. One of them has the right number/color of wires to lead me to belive that is what I am looking for. I guess this was done so that the Tow Command equipment (fits in the coing tray) could be added later for those who did not buy it from factory.
Dealer left out my harness, so I will have to wait to get one before I know for sure.
Maybe this will help someone else.
Dealer left out my harness, so I will have to wait to get one before I know for sure.
Maybe this will help someone else.
