Auto 4x4 question
Thread Starter
|
Posting Guru
Joined: Feb 2006
Posts: 1,459
Likes: 0
From: Wyoming
Auto 4x4 question
So I have the auto 4wd system (ESOF) and the other day after using 4 Low for a few minutes it wouldnt go back into 2wd or 4 high. I let it sit in nuetral for quite some time and nothing. So I drove around for a little bit, stopping, toggling the switch and finally it kicked out. Ive read about this in the past but couldnt find any of the old threads, All i remember is that its probly a certain sensor somewhere. (hoping I can change on my own) I dont want this happening again, so if someone could help me out it would be great. Thanks.
Last edited by a-rod; Apr 2, 2007 at 10:44 PM.
Elder User
Joined: Sep 2005
Posts: 911
Likes: 0
From: Mexifornia
I don't think the solenoid would be the culprit if it's working fine for 4wd high...I just have as much trouble with mine when its low...if you don't mind me asking whats the part number or cost for the blocks?
Thread Starter
|
Posting Guru
Joined: Feb 2006
Posts: 1,459
Likes: 0
From: Wyoming
Originally Posted by bczolone
I don't think the solenoid would be the culprit if it's working fine for 4wd high...I just have as much trouble with mine when its low...if you don't mind me asking whats the part number or cost for the blocks?
