quick question for 6.0 tech
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 159
Likes: 0
quick question for 6.0 tech
Long story short, truck had a p0603 pcm kam error and p132b code which is related to the new 06E17 flash. My question is, will P132B set off the check engine light? I unplugged the edge yesterday morning and drove it yesterday and today and the CEL hasn't returned. A total of over 120miles. I had cleared both codes a week ago and the CEL came back on before I put 60 miles on it. if anybody could let me know or if you have seeen this question anywhere else give me the link. thanks guys. can't post sig yet but here is info on truck.
70,000 miles with clean oasis
2003 F250 crew cab 4x4 Centennial Edition w/6.0
Build date: 3/26/03
4.5" DR hanger w/Bilstein 5100s. 20" KMC Hoss. 35" toyo open country mud terrain.
afe stage 2
4" MBRP turbo back
70,000 miles with clean oasis
2003 F250 crew cab 4x4 Centennial Edition w/6.0
Build date: 3/26/03
4.5" DR hanger w/Bilstein 5100s. 20" KMC Hoss. 35" toyo open country mud terrain.
afe stage 2
4" MBRP turbo back
Last edited by darsey715; Mar 27, 2007 at 10:19 PM.
Logistics Pro
Joined: Dec 2004
Posts: 3,541
Likes: 5
From: Weatherford Texas.
search the forum ther is another thread about this issue. in fact here it is
https://www.ford-trucks.com/forums/5...ats-p0603.html
https://www.ford-trucks.com/forums/5...ats-p0603.html
Last edited by wb6anp; Mar 28, 2007 at 12:29 AM.
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 159
Likes: 0
Originally Posted by wb6anp
search the forum ther is another thread about this issue. in fact here it is
https://www.ford-trucks.com/forums/5...ats-p0603.html
https://www.ford-trucks.com/forums/5...ats-p0603.html
Thread Starter
|
Senior User
Joined: Mar 2007
Posts: 159
Likes: 0
thank you 03f250 and BTH, I unplugged my edge on monday morning, put over 120 miles on the truck and the code hasn't come back. I don't plan on plugging the edge back in. answered my question in full. thanks again!
