electrical night mare
New User
Joined: Apr 2002
Posts: 11
Likes: 0
From: Greenville Darke
electrical night mare
Hey guys I'm sorta new to the forum and I have a couple of questions.
1st I have an 83 bronc that i traded an 86 bronco II for best thing I ever did so here's what I got the guy before me seized the 351 and dropped in a 302 no problem except all the electronics was cut so now I have 2 coil hook ups(go figure) and a toggle to fire the ignition so now when I turn on head lights or other accesories she runs real rough and it put a **** of a draw on the system also I have this harness that comes from behind the motor to the pass side that is hooked to nothing. 2nd I'm not sureabout the balancing of it it seems like the front of the motor shake real eratic its a manual tranny so I'm not sure or the flywheel or harmonic balancer being in sink with the motor without pulling it. All help will be greatly appreciated. Thanks The Greengoblin
1st I have an 83 bronc that i traded an 86 bronco II for best thing I ever did so here's what I got the guy before me seized the 351 and dropped in a 302 no problem except all the electronics was cut so now I have 2 coil hook ups(go figure) and a toggle to fire the ignition so now when I turn on head lights or other accesories she runs real rough and it put a **** of a draw on the system also I have this harness that comes from behind the motor to the pass side that is hooked to nothing. 2nd I'm not sureabout the balancing of it it seems like the front of the motor shake real eratic its a manual tranny so I'm not sure or the flywheel or harmonic balancer being in sink with the motor without pulling it. All help will be greatly appreciated. Thanks The Greengoblin
