What to do for wheels?!?!?!?
Thread Starter
|
Junior User
Joined: Dec 2005
Posts: 64
Likes: 0
From: Southeastern Wisconsin
What to do for wheels?!?!?!?
i have a 84 F-250 with an 8x6.5 bolt pattern im first of all wondering what anyone might have done for their trucks and wheels. first thing is i have the rear floating hub and the front lockers for the 4x4. im looking at a wheel here o get but im not sure if they will fit with the rear hub and front lockers sticking out so far.
http://www.4wheelparts.com/wtProdDet...rtNo=M/T579481
if these wont work what should i look at getting that might be close to this in pricing and looks?
=D usty
http://www.4wheelparts.com/wtProdDet...rtNo=M/T579481
if these wont work what should i look at getting that might be close to this in pricing and looks?
=D usty
Post Fiend
Joined: Jul 2006
Posts: 6,948
Likes: 44
You could paint the hub so it does not look so ugly, but I would bet that they offer a longer / deeper center cap to cover the unsightly area. You will have to run an open cap for the front, so you can lock, and unlock the hubs wne you need 4x4. Perhaps a phone call to the store will clear things up...
