HIdden Hitch Problems
Thread Starter
|
New User
Joined: Oct 2006
Posts: 3
Likes: 0
HIdden Hitch Problems
I am trying to install a HIdden Hitch receiver on a 2001 Edge. I am able to get four of the six bolts on, however, the other two, on oppisite sides of the frame just will not go in. Any suggestions on how to get it on would be great. The frame is probably a 1/4 inch from lining up with the holes in the hitch. Thanks
Jaime
Jaime
Elder User
Joined: Apr 2006
Posts: 600
Likes: 0
From: Cisco, TX pop: 2500
I just loosely installed the other bolts and pushed on it to line it up. I put the ball mount in the reciever and pulled up (the back didn't line up like the front). Of course, I just happened to have a 6" drop ball mount, so the amount of leverage available was amazing.
Elder User
Joined: Feb 2007
Posts: 771
Likes: 0
From: Aurora
As long as you remember 5 yrs from now when you hook up that heavy trailer full of shingles!!
The DMV might have a problem if they inspect.
The DMV might have a problem if they inspect.
Last edited by fflintstone; Mar 12, 2007 at 01:10 PM. Reason: DMV not DOE
