1986 Bronco project. Need Help
Thread Starter
|
New User
Joined: Oct 2006
Posts: 6
Likes: 0
1986 Bronco project. Need Help
I am restoring a 1986 full size bronco. Has the 302 motor and automatic trans. The biggest problem at this point is if I take a garden hose and try to fill the radiator with water, water pours out at both pass and drivers side motor mounts. I was told it needed a new freeze plug. Is this correct? And if so Could I get a link to a new one? Thanks
Posting Guru
Joined: Jan 2007
Posts: 1,147
Likes: 0
From: Coweta,GA, GO DAWGS!!!!!!
Well I have some questions first- Is there a thermostat in this engine? Are you pouring in coolant while the engine is running and warm? Who built the engine? Is it the same that came out,just reinstalled w/o rebuild? If you get lucky and this is freeze plugs,like shouldgota said- why did this happen? They don't just fall out.
If it's the freeze plugs replace them with new BRASS freeze plugs.
Let me know.
If it's the freeze plugs replace them with new BRASS freeze plugs.
Let me know.
