Hello from ISSPRO in Oregon
Thread Starter
|
Junior User
Joined: Feb 2007
Posts: 53
Likes: 0
From: Happy Valley, OR
Hello from ISSPRO in Oregon
I am new to this particular site, but some of you may recognize me from some of the other diesel performance forums over the past several years. I am "Michael" on most other sites, and "MJPliska" on TDS. I am the Engineering Manager at ISSPRO, which many of you will be familiar with for gauges and turbo temp monitors.
My personal rig is a 1995 F350 CC DRW, with some simple mods (Tymar intake, 3-3.5-4" downpipe, 5" exhaust, Trans valve body mods, Edge Evolution on "Race" setting (to be replaced at some point by a selectable chip). And of course some prototype ISSPRO gauges (no better place to test our concepts out than in my own rig). I race my F350 in NHRDA series races (at least since the last half of the 2006 season), and also have a few drag cars which I've been racing since 1983 (crap, now I feel old!). I also raced a U-Haul F350 at the 2006 DHRA Indy Nationals. I'll pretty much drag race anything I can get my hands on...
If you have any questions about ISSPRO products, or suggestions for new ones, please feel free to drop me a PM or an e-mail.
Thanks and regards,
Michael Pliska
ISSPRO Engineering Manager
My personal rig is a 1995 F350 CC DRW, with some simple mods (Tymar intake, 3-3.5-4" downpipe, 5" exhaust, Trans valve body mods, Edge Evolution on "Race" setting (to be replaced at some point by a selectable chip). And of course some prototype ISSPRO gauges (no better place to test our concepts out than in my own rig). I race my F350 in NHRDA series races (at least since the last half of the 2006 season), and also have a few drag cars which I've been racing since 1983 (crap, now I feel old!). I also raced a U-Haul F350 at the 2006 DHRA Indy Nationals. I'll pretty much drag race anything I can get my hands on...
If you have any questions about ISSPRO products, or suggestions for new ones, please feel free to drop me a PM or an e-mail.
Thanks and regards,
Michael Pliska
ISSPRO Engineering Manager
Moderator
Joined: Dec 2003
Posts: 97,596
Likes: 2,008
From: Saskatoon, Saskatchewan
Welcome, nice to have you on board with us here on FTE.
It sounds like you maybe interested in becoming an FTE sponsor, check it out here: https://www.ford-trucks.com/advertis...sing_info.html
It sounds like you maybe interested in becoming an FTE sponsor, check it out here: https://www.ford-trucks.com/advertis...sing_info.html
Thread
Thread Starter
Forum
Replies
Last Post
