Changing banjo outlet seals
Thread Starter
|
Senior User
Joined: Jan 2003
Posts: 241
Likes: 0
From: Redding, Ca USA
Changing banjo outlet seals
Need to know is this pretty straight forward to do? Just back off the bolt, change out the seals and tighten back up the bolt...anything else I should know? Thanks
Also, how hard are the blue fuel lines to change? Do you have to take off the pump?
Also, how hard are the blue fuel lines to change? Do you have to take off the pump?
Fleet Mechanic
Joined: Oct 2003
Posts: 1,764
Likes: 0
From: CentralEastern Utah
The hoses are easy...just pull the two bolts holding the housing down so you can pull it awy from the pump to remove the hoses. The banjo bolt is tougher than it looks. Comes off real easy but is a PITA to get started back on their with the two new washers. Just not much room to get a hand in their.
Post Fiend
Joined: Oct 2003
Posts: 5,903
Likes: 1
From: MICHIGAN
