56 cab on 92 frame
Lead Driver
Joined: Aug 2002
Posts: 6,682
Likes: 12
From: Saskatoon SK Canada
I'm sorry to say it will require lots of work to the cab mounts since the original frame width is 34" and the 92 frame is 37.5". It would most likely need totally custom mounts and some cab cutting.
Moderator
Joined: Dec 2003
Posts: 97,572
Likes: 2,005
From: Saskatoon, Saskatchewan
I alwasy though it wouldn`t be very hard switching frames before coming to FTE. I soon found out that`s it`s very time consumming and in most cases not worth even thinking about because of the difference in frame width and design.
Plus with refreshing the stock components, adding power steering and disc brakes if desired the orginal system can be made to work quite well.
Plus with refreshing the stock components, adding power steering and disc brakes if desired the orginal system can be made to work quite well.
