edge evolution mounting pod?
Thread Starter
|
New User
Joined: Oct 2006
Posts: 19
Likes: 0
edge evolution mounting pod?
Would one of you that have the edge evolution mounting pod please let me know what size the opening is that the evolution mounts into?
I am thinking about getting the mounting pod to mount a backup camera in and would like to know if the opening is big enough.
I am thinking about getting the mounting pod to mount a backup camera in and would like to know if the opening is big enough.
Elder User
Joined: Aug 2004
Posts: 585
Likes: 2
From: Willis, Texas
well, first its not a perfect rectangular shape, so...with that being said here are the minimum dims.
2.050 x 3.900 x .635
Mind you now, this is blow-molded plastic...you get a good "hot-knife" and you can tweak those dims a bit.
D
2.050 x 3.900 x .635
Mind you now, this is blow-molded plastic...you get a good "hot-knife" and you can tweak those dims a bit.
D
Thread Starter
|
New User
Joined: Oct 2006
Posts: 19
Likes: 0
Originally Posted by db_tanker
well, first its not a perfect rectangular shape, so...with that being said here are the minimum dims.
2.050 x 3.900 x .635
Mind you now, this is blow-molded plastic...you get a good "hot-knife" and you can tweak those dims a bit.
D
2.050 x 3.900 x .635
Mind you now, this is blow-molded plastic...you get a good "hot-knife" and you can tweak those dims a bit.
D
