AIC question
Thread Starter
|
New User
Joined: Oct 2006
Posts: 17
Likes: 0
AIC question
I am redoing my injectors and someone here told me that the IAC is above the throttle body on the plenum (on the right side looking straight on). Does that get a regular gasket or can I use a liquid gasket? The auto parts store can't find it in their computers.
Also, is there any way to secure the injectors, or do they just get pushed into their housings with only the o-rings to secure them?
Also, is there any way to secure the injectors, or do they just get pushed into their housings with only the o-rings to secure them?
Elder User
Joined: Feb 2002
Posts: 504
Likes: 2
From: Saddle Brook United State
The IAC is screwed directly on the top of the throttle body and takes a gasket, which may not be available separately. The injectors are held in by the O Rings and the fuel manifold on top of them. The valve on the end of the air plenum , next to the firewall is the EGR valve, it also has a gasket.
stractor
stractor
