331 Stroker
Thread Starter
|
Mountain Pass
Joined: May 2003
Posts: 232
Likes: 16
From: Milwaukee USA
331 Stroker
Just looking for some expirience. Has anyone built a 331 Stroker from a 302 block. If so, did you grind/clearance the lower cylinder area out of need or just good insurance or not at all. I haven't built a 331, the 347's always have to be clearanced, just don't know if I'll need to or not on a 331.
true 5.4 rod and 3.25 crank.
true 5.4 rod and 3.25 crank.
