Replacing the engine block heater
Thread Starter
|
New User
Joined: Mar 2004
Posts: 20
Likes: 0
Replacing the engine block heater
Hello all,
I have a 1995 F250 and I need to replaced the engine block heater.
I have tried to plug it in and nothing is getting warm. I already replaced the plug but I still get nothing.
If anyone can explain to me how to replace this item or where it's connected to the engine It would be greatly appreciated.
Thanks
Cold in Colorado
I have a 1995 F250 and I need to replaced the engine block heater.
I have tried to plug it in and nothing is getting warm. I already replaced the plug but I still get nothing.
If anyone can explain to me how to replace this item or where it's connected to the engine It would be greatly appreciated.
Thanks
Cold in Colorado
Senior User
Joined: Oct 2003
Posts: 268
Likes: 0
From: New Hampshire
its a good pain in the *** its in the side of your motor in one of the casting plugs i belive you need some special tools to remove it... dont quote me on that one though i have never removed or installed one myself.
