Bed box dividers
Thread Starter
|
Elder User
Joined: Jan 2005
Posts: 507
Likes: 0
From: Alpharetta
Bed box dividers
currently i have a bed box and have thought about somehow making up a divider system for it, outta ply wood or maybe even pcv piping. the box has only one opening. it opens with the hinge on the forward most part of the box. any ideas on dividers? i keep recover equiptment, tools, as well as extra fluids back there and they always get jarred around. thanks
keith
keith
Postmaster
Joined: Jul 2006
Posts: 3,978
Likes: 0
From: Central PA
Use ply wood and make what size you need . I would use 5/8 ply but you use what ever. Make a box out of ply no bottom to fit your tool box. Set ply box on floor Lay out what you want and where for deviders. After cutting and tests fit put outer box in tool baox and place deviders. use L-brackets to hold them in. Dont skimp. so won't have fix later. If you want extra layer figure depth and run piece ply around and glue/screw make box to fit in and you have doulbe layer. Hope I helped some,I do/build this all time but don't have to explain how. good luck
