DIY Mass Air Article
Thread Starter
|
Tuned
Joined: Nov 2002
Posts: 395
Likes: 11
DIY Mass Air Article
I see so many people asking about Mass air on here I thought I would post this DIY article from Ford Muscle. It is a great article. It is also great to help figure out how to change the Ford Motorsport kit to be sequential because you can follow the wiring in this article.
http://www.fordmuscle.com/archives/2...sion/index.php
http://www.fordmuscle.com/archives/2...sion/index.php
Lead Driver
Joined: Nov 2002
Posts: 9,557
Likes: 44
From: Concord, NC
The Ford Motorsports kit comes with an overlay harness that takes care of the sequential injection wiring.
Here is another site people can use as reference (also linked from the above article): http://bjoern.brembs.net/cars/maf_conversion/
Here is another site people can use as reference (also linked from the above article): http://bjoern.brembs.net/cars/maf_conversion/
Hotshot
Joined: Jul 2002
Posts: 14,285
Likes: 12
From: Bend,OR
