where is the IPS senser?
Thread Starter
|
Posting Guru
Joined: Dec 2006
Posts: 1,639
Likes: 2
where is the IAC senser?
IAC i was looking to clean it because it stalls at idle sometimes but where is it? is it that big thing on the side of the throttle body or what? when i clean it do i need to get a new gasket for it?
Last edited by 1966Tbird; Jan 16, 2007 at 10:10 AM.
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Yes, it's the cylinder type thing on the side of the TB. If you remove it, disconnect the solenoid from the plunger assembly and clean with carb cleaner and a brush until it moves freely. You won't be able to move the plunger with the solenoid connected BTW. It's always a good idea to get a new gasket for reassembly because the old one may or may not come off cleanly.
New User
Joined: Jan 2007
Posts: 3
Likes: 0
PLungers?
Hi thanks for replying,Would you know the plunger im talking about?I see a bit of what looks like antifreeze dripping out of it,Id like to replace it but cant find my Explored book for the name if it.Its a black hat looking plunger with a little silver arm comming off it .Its connected to 3 hoses.It looks simple enough to change but I would like to make sure that it is whats making my engine light come on.thanks for any help
