Power
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 219
Likes: 0
From: Transfer
Power
whats the best modification besides boring that i could do to my 91 300 to get it to make pulling power, its already got enough, i want a little more, if you can get a honda to make power, i think i can get some out of my old 300, its already got
k&n replacement filter
no a/c
k&n replacement filter
no a/c
Postmaster
Joined: Feb 2003
Posts: 3,441
Likes: 5
From: Muskegon, MI (home)
Shoot there are all kinds of ways to get a little more punch out of these babies. What type of truck do you have: F150, 250, Bronco, Van/ auto or manual tranny/ what gears/ 4x2 or 4x4? You have the injected 300 being a 1991, there are several companies that offer bigger cams. You can install a higher output coil, open up the exhaust, bigger injectors, the only limit to your madness is your wallet!
Postmaster
Joined: Apr 2000
Posts: 3,890
Likes: 9
From: La Verne, California
The 1st & Foremost thing is to Make these Engines "BREATH"!
Get an Offenhouser "DP" Intake w/ a 390 or 450 Holley & a decent 2-into-2 Header.
You'll notice a rather nice improvement in accelleration.
The if you wish more, look into a Minimal Porting & Polishing, Oversized Valves, a Melling Torque Cam or something from Crane for a real nasty bite.
Look @ my "Gallery" if you wish to view more Mods to get a 400 FTP & 300 HP, now 312 I-6.
Get an Offenhouser "DP" Intake w/ a 390 or 450 Holley & a decent 2-into-2 Header.
You'll notice a rather nice improvement in accelleration.
The if you wish more, look into a Minimal Porting & Polishing, Oversized Valves, a Melling Torque Cam or something from Crane for a real nasty bite.
Look @ my "Gallery" if you wish to view more Mods to get a 400 FTP & 300 HP, now 312 I-6.
