When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need some information on how to remove a large dent in my cab caused by the truck bed slamming into the cab when my truck caught a pole. the bed has been removed but i am not sure that i can acess the dent from the inside of my extended cab
Take the interior panel out of the cab n see if its possible or not. Other words You can use a stud welder and slide hammer to pull it out but you will have high spots in the sheet metal when done.