Brake Switch Adjustment
Moderator
Joined: Jan 2001
Posts: 57,023
Likes: 2,754
From: Virginia
It depends on what year you are working on, but I am guessing most 70's up Fords used the type switch. If yours sits and rides on the pedal arm, then it's not adjustable. But it does have a spring that is important to it's operation. Also, if someone has been messing with the brake pedal/pin setup, you may need to look at it.
The pin system for the master cylinder that uses this type of switch has built-in slop or play. When you push on the pedal, the slop in the pin is what activates the brake switch.
The pin system for the master cylinder that uses this type of switch has built-in slop or play. When you push on the pedal, the slop in the pin is what activates the brake switch.
