E4od Transmission Pan Question
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 305
Likes: 0
E4od Transmission Pan Question
i went wheeling over this last week and got hung up on some rocks and managed to dent the lowest part ofthe transmission pan. there is no leaking and everything seems to be working fine.
my question is whats in the transmission where that part of the pan dips down ? is the magnet there ? some type of fluid pick up tube ?
im wondering if i should replace the pan.
also is there any skid plates out there or do you have to fab one up yourself ?
96xlt,E4OD.
my question is whats in the transmission where that part of the pan dips down ? is the magnet there ? some type of fluid pick up tube ?
im wondering if i should replace the pan.
also is there any skid plates out there or do you have to fab one up yourself ?
96xlt,E4OD.
Post Fiend
Joined: May 2004
Posts: 11,289
Likes: 6
From: Lakewood, Ohio
it dips down where the filter is located and a small circle where magnet is.
i would drop the pan and change the fluid, filter and fix or replace the pan.
drain torque convertor at the same time.
i would drop the pan and change the fluid, filter and fix or replace the pan.
drain torque convertor at the same time.
