Express Down Window
Thread Starter
|
Junior User
Joined: Nov 2006
Posts: 53
Likes: 0
Express Down Window
Found the article on how to install the module for the express down or one touch down feature for the side windows. Got a 'relay' and hooked everything up. One problem, the window did not go al-the-way-down. The window went down 1/8" and stopped. Pushed the button, hear a noise in the relay and the window went down another 1/8". Double checked the wiring and same thing happened. Anyone with any thoughts? Is the 'relay' bad? I opened the 'relay' and it is an electronic component with resistors, capacitors, etc..
Roger
Roger
Thread Starter
|
Junior User
Joined: Nov 2006
Posts: 53
Likes: 0
The web address is:
https://www.ford-trucks.com/article/...d_Broncos.html
It is in the Articles section of this website.
Also a Car Domain article:
http://www.cardomain.com/ride/296394/22
Roger
https://www.ford-trucks.com/article/...d_Broncos.html
It is in the Articles section of this website.
Also a Car Domain article:
http://www.cardomain.com/ride/296394/22
Roger
Last edited by RMS94; Dec 24, 2006 at 12:52 AM.
