has anyone used that rust bullet they are advertising, I've done a little reading and they are pretty proud of it. I was just looking for feed back as to wether I should try it or stick with my original thought of por-15.Thanks guys

 

Moved to proper forum.

 

I went with Eastwoods Rust Encapsulator and I have been happy with it so far. An article in Auto Restorer showed that Rust Encapsulator was a better product compared to POR15. I have not had any experience with Rust Bullet.

 

I second the eastwood rust encapsulator. I couldnt be happier with it after a year still looks good on my frame

 

what type of prep work is needed for the rust encapsulator, price, where to get it and how much to do the whole frame. thanks guys

 

You need to remove any loose rust with a wire brush and sandpaper. Thoughly degrease the frame and I like to go over the surface with lacquer thinner to make sure it is thoughly clean and dry and I just brushed it on my frame with a good brush. I did my entire frame with just one quart of Rust Encapsulator and you can get it at Eastwood for $29.99 a quart.

http://www.eastwoodco.com/jump.jsp?itemID=1136&itemType=PRODUCT

 

I used ospho, and it worked fine. Gives you a decent, hard primer to paint over.

http://frederic.midimonkey.com/f350-framerepair.html

It's a large page, give it time to load.