hazzards not working

Reply Subscribe

Thread Tools

Search this Thread

Nov 14, 2006 | 01:30 AM

1978fordf250

Thread Starter

Posting Guru

Joined: Mar 2004

Posts: 1,077

Likes: 0

hazzards not working

hey guys how can i go about checking to get my 4way hazzard lights working properly? right now whenever i put them on i get NOTHING no clicing noice or anything. the lights dont even come one and stay on. They just dont do anything at all. what could be the problem and how can i trace it down?
thanks,
jimmy
ps i have 10 days to get this stuff working so i can get it inspected so its not illeagle because i just bought the truck.

Nov 14, 2006 | 06:26 AM

kilog55

Elder User

Joined: May 2006

Posts: 636

Likes: 1

buy a new flasher, there are 2 under the dash one for turnsignals and one for 4 ways, turn on your turn signals and remove the one that isnt clicking and raplace

Nov 14, 2006 | 11:32 AM

1978fordf250

Thread Starter

Posting Guru

Joined: Mar 2004

Posts: 1,077

Likes: 0

i changed the flasher and still nothing. no clicking or anything.
thanks,
Jimmy

Nov 14, 2006 | 12:03 PM

kilog55

Elder User

Joined: May 2006

Posts: 636

Likes: 1

check the fuses then

Nov 14, 2006 | 12:59 PM

Mil1ion

New User

Joined: Jan 2008

Posts: 0

Likes: 24

I'd say the fuse is blown.

#8

Nov 15, 2006 | 05:40 AM

trinogt

Cargo Master

Joined: Apr 2001

Posts: 2,364

Likes: 3

From: Eustis FL

If after replacing the fuse you still have no working hazard lights, you may have to replace the hazard switch. All the signal lights run through this circuit, so check that they are working properly as well.

Nov 15, 2006 | 11:11 AM

1978fordf250

Thread Starter

Posting Guru

Joined: Mar 2004

Posts: 1,077

Likes: 0

hey i replaced the fuse and it works now! thank you very much thats one more thing crossed off of the list of things that need done to it.
thanks again,
jimmy