Please help!!!!
Thread Starter
|
New User
Joined: Nov 2006
Posts: 22
Likes: 0
Please help!!!!
Hello:
I have a 99 4x4 5.4L eddie expedition.
The rear end is droped,i jumped out the relay and the compressor runs.
I didn't however see the back end raise i only held the jumper on for 20sec's.
When starting the truck i hear the sensor click and then immediatly click again
one loud one faint,three clicks in all. Does this sound like a sensor problem?
Any ideas?
I have the hood open and my volt meter on.
Thanks
I have a 99 4x4 5.4L eddie expedition.
The rear end is droped,i jumped out the relay and the compressor runs.
I didn't however see the back end raise i only held the jumper on for 20sec's.
When starting the truck i hear the sensor click and then immediatly click again
one loud one faint,three clicks in all. Does this sound like a sensor problem?
Any ideas?
I have the hood open and my volt meter on.
Thanks
Thread Starter
|
New User
Joined: Nov 2006
Posts: 22
Likes: 0
I jumped the relay out again this time for a minute or so. The backend raisedup it seems to be a little higher on the passanger side. I removed the sensor collapsed and extended it didn't hear any click didn't do anything.
I turned off the air suspension seems to be holding I'll wait to see if anyone else replys.
Thanks
I turned off the air suspension seems to be holding I'll wait to see if anyone else replys.
Thanks
