kd cable
Thread Starter
|
New User
Joined: Feb 2004
Posts: 24
Likes: 0
kd cable
Just about ready to install an edelbrock 1405 on my 66 cs, installed a 360 this year with com behind it. I think the lokar kd cable for fmx will fit. But is it actually worth doing, or simply stay with the original rod?
Postmaster
Joined: Nov 2001
Posts: 3,351
Likes: 1
From: Escondido, CA
Either way the kickdown will work. One just looks better then the other. If you are asking which one makes it easier to adjust the kickdown point. Then I would definately use the Lokar since you don't have to bend any rods or crawl under the truck. Just loosen a jamnut and move the cable end as needed.
