Technical data question
Thread Starter
|
Posting Guru
Joined: Jan 2006
Posts: 1,101
Likes: 2
From: Malvern, Ohio
Technical data question
Does anyobody know of a website, or a book I could purchase, or does anbody have all the intake/exhuast valve sizes for Ford engines here? From just standard engine to performance engines built by FOMOCO
Thread Starter
|
Posting Guru
Joined: Jan 2006
Posts: 1,101
Likes: 2
From: Malvern, Ohio
Would it be too much trouble for ya to give me of all the sizes you have for Ford engines when you are able? If ya have any suggestions on looking at certain resources tell me, because havent the slightest clue where to look since the chiltons only have stem diameter n clearance.
ANY person who has information on valve sizes can put what they have in if they want
Any and ALL information will be awsome and greatly appreciated.
ANY person who has information on valve sizes can put what they have in if they want
Any and ALL information will be awsome and greatly appreciated.
Thread Starter
|
Posting Guru
Joined: Jan 2006
Posts: 1,101
Likes: 2
From: Malvern, Ohio
Mostly older engines to begin with becuase i know very lil about them
429 standard
429's CJ,SCJ,B,Nascar
302 standard
302 CJ,B
351 Cleveland
400
All FE's 332,352,360,390,410,427
Did the FT engines have differant valve sizes??? If so thro those in too
whenever
429 standard
429's CJ,SCJ,B,Nascar
302 standard
302 CJ,B
351 Cleveland
400
All FE's 332,352,360,390,410,427
Did the FT engines have differant valve sizes??? If so thro those in too
whenever
New User
Joined: Jan 2008
Posts: 0
Likes: 24
63-67 289 w/11.6, 8.7, 10.0, 10.5, 8.8 CR
I- 1.788"
E- 1.457"
1966-67 289 Low Output head w/9.2,9.8 CR
I-1.788"
E- 1.460"
1967 289 HP w/10.0 & 10.5 CR
I- 1.780"
E- 1.450"
1968- 289 2v w/8.7 CR
I - 1.788"
E -1.457"
1968 302 2v w/8.7, 9.0, 10.1 CR
I - 1.788"
E - 1.457"
1968 302 4v 9.0,9.5,10.0 CR
I- 1.783"
E- 1.457
1969-70 - 302 w/9.0,
I - 1.788"
E - 1.457"
1968-79 Boss 302 wedge
I- 2.23" (69) & wedge with push rod guide plates 2.19
I - 2.19" (70) & wedge with push rod guide plates
E- 1.71"
E- 1.71"
69 - 302 Tunnel Port head
I - 2.16"
E- 1.57"
69-70 351W
I- 1.84"
E-1.54"
I- 1.788"
E- 1.457"
1966-67 289 Low Output head w/9.2,9.8 CR
I-1.788"
E- 1.460"
1967 289 HP w/10.0 & 10.5 CR
I- 1.780"
E- 1.450"
1968- 289 2v w/8.7 CR
I - 1.788"
E -1.457"
1968 302 2v w/8.7, 9.0, 10.1 CR
I - 1.788"
E - 1.457"
1968 302 4v 9.0,9.5,10.0 CR
I- 1.783"
E- 1.457
1969-70 - 302 w/9.0,
I - 1.788"
E - 1.457"
1968-79 Boss 302 wedge
I- 2.23" (69) & wedge with push rod guide plates 2.19
I - 2.19" (70) & wedge with push rod guide plates
E- 1.71"
E- 1.71"
69 - 302 Tunnel Port head
I - 2.16"
E- 1.57"
69-70 351W
I- 1.84"
E-1.54"
Trending Topics
New User
Joined: Jan 2008
Posts: 0
Likes: 24
69 351W
I- 1.852"
E- 1.548
1969 351C -2v w/10.5CR
I- 2.04"
E-1.66"
1969 351C -4v w/ 11.0 CR
I- 2.19"
E- 1.71"
I- 1.852"
E- 1.548
1969 351C -2v w/10.5CR
I- 2.04"
E-1.66"
1969 351C -4v w/ 11.0 CR
I- 2.19"
E- 1.71"
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Ford Super Duty: 5 Things Owners LOVE, 5 Things They LOATHE!
Joe Kucinski
Every 2026 Ford Truck Engine RANKED from WORST to FIRST!
Michael S. Palmer
The Best F-150 Deal of Every Trim Level (XL through Raptor)
Joe Kucinski
Thread Starter
|
Posting Guru
Joined: Jan 2006
Posts: 1,101
Likes: 2
From: Malvern, Ohio
Thanks alot, keep the info comin when you can, i greatly appreciate it. Where exactly did you and do you get this information from might i ask? Because I sure as heck don't know where to look.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
I have 7 bookcases of automotive library.
I buy books of all kinds as I find them.
Garage sales,swap meets, used books stores (for most of them).
I have had friends with Ford dealerships since 1972 and when they got rid of stuff I get it.
Also auto parts wholesalers paper books for parts applications.
I had 32 boxes of books when I moved here in 2003.
The book I am getting this info from is called: Bill Carrols Ford Performance Engineering Guide.
http://www.amazon.com/Ford-Performan...e=UTF8&s=books
I got it for a $1.00 at a swap meet in 1994.
The print is small and I get tired.
I will keep adding more everyday.
I buy books of all kinds as I find them.
Garage sales,swap meets, used books stores (for most of them).
I have had friends with Ford dealerships since 1972 and when they got rid of stuff I get it.
Also auto parts wholesalers paper books for parts applications.
I had 32 boxes of books when I moved here in 2003.
The book I am getting this info from is called: Bill Carrols Ford Performance Engineering Guide.
http://www.amazon.com/Ford-Performan...e=UTF8&s=books
I got it for a $1.00 at a swap meet in 1994.
The print is small and I get tired.
I will keep adding more everyday.
Last edited by Mil1ion; Nov 1, 2006 at 11:29 PM.