Head light swap
Thread Starter
|
Freshman User
Joined: Jun 2006
Posts: 30
Likes: 0
Head light swap
I would like to change my lights from the Mazda to the Ford ranger. What mods if any do I need to make to the headlight brackets or anything else for that matter. appreciate the help thanx
Elder User
Joined: Jun 2006
Posts: 924
Likes: 0
From: Fuquay Varina,NC
I believe that the mazdas have not changed at all, as far as the headlights. You should be able to reuse your hood, but you will still need fenders, header panel, grille, lights, etc. If this is something you really want to do, i would look for a front clip somewhere, or a truck that was wrecked in the rear you could get for cheap and take all the parts you need.
Post Fiend
Joined: Jul 2005
Posts: 8,462
Likes: 4
From: Durant, OK (SOSU)
Hey I got a '94 as well, so I can get you some measurements to see if the parts will crossfit.
Also, check some of the major parts suppliers. I know when I messed my front end up (PS pump seized, double brick mailbox didn't seize quite so much), several of the parts purchased were listed for "93/97 Ranger/B-Series".
Also, check some of the major parts suppliers. I know when I messed my front end up (PS pump seized, double brick mailbox didn't seize quite so much), several of the parts purchased were listed for "93/97 Ranger/B-Series".
Thread
Thread Starter
Forum
Replies
Last Post
