code elim, boost fitting?'s
Thread Starter
|
Elder User
Joined: Aug 2006
Posts: 870
Likes: 0
From: Mountaintop, PA
code elim, boost fitting?'s
My ebpv delete "blank" pedestal is coming with my new turbo, will i need a code eliminator for the sensor since i will not have the plug hooked up to the selenoid anymore. Or can i just leave it unplugged?
My guages should be here today , I never thought about this before but is the MAP line the best place to hook into ar at the AIH plug? The kit is coming with the materials to hook into the MAP. Any input is appreciated.
My guages should be here today , I never thought about this before but is the MAP line the best place to hook into ar at the AIH plug? The kit is coming with the materials to hook into the MAP. Any input is appreciated.
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 25
From: Damon (South East Texas)
I have the EBPV solenoid wiring disconnected. It will show a code with a reader, but will not set the SES light. I have my boost line tapped into the AIH delete plug. You can splice into the MAP hose with basically the same results. If you have some sort of "overboost eliminator", you will want to splice into the hose between it and the manifold 'Y'. By having my boost fitting in the plug, I don't have to worry about the bleed off affecting the boost reading.
