Does anyone know...
Thread Starter
|
Elder User
Joined: Jul 2000
Posts: 571
Likes: 2
Does anyone know...
Why noone has drums to fit the back of a '64 F-250?
I've looked through all my catalogs and found all the parts I need to do this brake rebuild, except drums for an 8 lug Dana 60! I'm still unsure on a dual MC to fit, but really need to find a source for these Drums!
Thanks guys...
-Andrew
f250_64(No Email Addresses In Posts!), same for yahoo messenger
Nothing, and I mean nothing, stirs the soul, saying I'm a bad **** like lettin'em rip with a window shaking, fuel gulpin, carbon monoxide belchin, attention gettin, V-oh my LORD!-8!
I've looked through all my catalogs and found all the parts I need to do this brake rebuild, except drums for an 8 lug Dana 60! I'm still unsure on a dual MC to fit, but really need to find a source for these Drums!
Thanks guys...
-Andrew
f250_64(No Email Addresses In Posts!), same for yahoo messenger
Nothing, and I mean nothing, stirs the soul, saying I'm a bad **** like lettin'em rip with a window shaking, fuel gulpin, carbon monoxide belchin, attention gettin, V-oh my LORD!-8!
Posting Guru
Joined: Nov 2000
Posts: 1,310
Likes: 3
From: Illinois
Does anyone know...
I don't know anything about the drums but did install a dual MC on my 64 4x4. I used the 68 Mustang master cylinder for drums. The pushrod was about 3/16's short so I had to drill and tap it to install a button head screw.
Thread Starter
|
Elder User
Joined: Jul 2000
Posts: 571
Likes: 2
Does anyone know...
Thanks for that info!
Greatly helped.
-Andrew
f250_64(No Email Addresses In Posts!), same for yahoo messenger
Nothing, and I mean nothing, stirs the soul, saying I'm a bad **** like lettin'em rip with a window shaking, fuel gulpin, carbon monoxide belchin, attention gettin, V-oh my LORD!-8!
Greatly helped.
-Andrew
f250_64(No Email Addresses In Posts!), same for yahoo messenger
Nothing, and I mean nothing, stirs the soul, saying I'm a bad **** like lettin'em rip with a window shaking, fuel gulpin, carbon monoxide belchin, attention gettin, V-oh my LORD!-8!
New User
Joined: Feb 2000
Posts: 24
Likes: 0
Does anyone know...
A four of my drums were worn badly on my '64 F250. I purchase all new drums through Champion Auto Parts. I think they cost around $60 each (ouch!) but now my brakes are completely rebuilt. I can stop that truck on a dime without power brakes with no problem. I would think your local parts house could locate some.
Good luck
'64 Ford F250 4X4
Good luck
'64 Ford F250 4X4
Thread
Thread Starter
Forum
Replies
Last Post
