ccv mod?
Thread Starter
|
Junior User
Joined: Sep 2006
Posts: 52
Likes: 0
ccv mod?
I was wondering if there is a modification to stop the crank case ventilation from going to the intake I know the big trucks Peterbilt, kenworth the older cats do not have this is there a way to have fresher colder air going to the intake without the mess of sloppy oil residue filling up the air to air if so please let me know thank you in advance...
Post Fiend
Joined: Jun 2006
Posts: 5,497
Likes: 7
From: Central, Al
I think you allready found the thread I started, but for a kit check out
http://www.puredieselpower.com/catal...f921cbb9739da8
http://www.puredieselpower.com/catal...f921cbb9739da8
Fleet Mechanic
Joined: Aug 2003
Posts: 1,772
Likes: 95
From: Phoenix, AZ
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
I have the ITP kit now because I like the aluminum tube that replaces the plastic stock tube. The ultra cheap version of this mod is to simply plug the hole in the intake connector and splice a hose into the valvecover fitting to route it under the truck.
