proper cleaning methods
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
I would think so, it doesn't take much pressure to push water into places it doesn't belong. Even the self serve car washes seem a little heavy to me, but with caution work well. I like to hose it all down with degreaser, use the whole can, it's cheap. let it sit for a while 10-30 minutes and wash from the top down.
I am still experimenting on how to do the job safely with COPs.
I am still experimenting on how to do the job safely with COPs.
Elder User
Joined: Jul 2004
Posts: 626
Likes: 0
From: People's republic of MA
For the motor, pressure washer is a no-no. To start, the motor should be warm, not hot! (As powrstrkn' said) If it's too hot to change your oil, it's too hot to clean with the hose. Spray liberally with degreaser (simple green) Let set, aggitate where needed, use a regular hose and nozzle to gently spray and rinse, don't go overboard and try to avoid direct jets of water on the electronics, including the COPs. Once rinsed, start it up to warm and better dry things. Finally, use a dressing of your choice to top it off... Just don't get any on the belts. 
Thread Starter
|
Posting Guru
Joined: Jun 2006
Posts: 1,623
Likes: 2
ok thank you for your replies...i will be cleaning the engine sometime soon and thank you because i would have sprayed the degreaser and just power washed it off....o well i probably would have ruined something, wouldnt have been the first time!! lol
Posting Guru
Joined: Nov 2004
Posts: 1,214
Likes: 0
From: All Over
Originally Posted by CounterMaker
ok thank you for your replies...i will be cleaning the engine sometime soon and thank you because i would have sprayed the degreaser and just power washed it off....o well i probably would have ruined something, wouldnt have been the first time!! lol
...and I'll second the "do not use a pressure washer" on the engine.
Posting Guru
Joined: Jul 2006
Posts: 1,191
Likes: 0
From: New York
Originally Posted by CounterMaker
just wondering is between 1750 - 2000 psi power washer to much for my truck...
Trending Topics
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Postmaster
Joined: Sep 2004
Posts: 2,508
Likes: 0
From: Utopia
All the trucks we pressure wash at work peel the black letters off the logos. It WILL happen eventually, but I don't think it looks to bad. Also, be careful with simple green on certain metals. just read the manual and rinse off the motor if you like.
New User
Joined: Sep 2006
Posts: 5
Likes: 0
Check out the forums at http://www.meguiarsonline.com for advice. The site is administered by Mike Phillips, one of the top detailing experts in the country.
There is no way I would use a high pressure wash on any part of my truck. (And, I've seen simple green take the paint off an engine.)
Do a little research and learn about the proper techniques and products to use to keep your truck clean.
There is no way I would use a high pressure wash on any part of my truck. (And, I've seen simple green take the paint off an engine.)
Do a little research and learn about the proper techniques and products to use to keep your truck clean.
